Jeep Automatic Transmissions Available from Midwest Transmission Inc.
Running damaged or worn out Automatic Transmission is dangerous and can cost you a lot of money.
We offer a very popular line of Heavy Duty Road Runner Series Automatic Transmission and Torque Converter Packages for Jeep 4WD applications. Find you hydraulic and electronic controlled units with us. We have a large inventory of automatic transmission and transaxles ready to ship.
What causes automatic transmissions fail
Automatic transmission failure may be caused by low fluid level; contaminated fluid brought on by heat buildup and non metal part degradation; and clogging veins in the valve body, pump, and torque converter. When exchanging your automatic transmission, make sure to flush the fluid through the cooling system, including lines from your transmission, to the radiator and the reservoir underneath the radiator at the least a few times while using correct chemicals. When adding automatic transmission fluid or changing your transmission fluid, verify the manufactures recommended fluid is utilized. A person can be shocked the number of times the incorrect fluid is utilized leading to an on-slot of issues.
All the other parts that don’t have brand new potential service life are replaced with the highest quality parts available. Conformity updates are installed to enhance maker’s designs to repair issues found after the vehicle leaves the factory. Our warranty is the best in the industry 100,000 miles and 3 years.
Throughout the rebuilding of your transmission, all gaskets and seals are replaced with brand new ones. All new clutch fractions are part of a complete rebuild and are always replaced during a proper overhaul, including bands, electronic solenoids seals, bushings, and gaskets. Valve bodies are taken apart, cleaned out, inspected. Then, all balls and springs are replaced. Specific attention is paid to the planetary gear set, including sun gear, annulus ring gear, planet gears, and planet carrier. Parts showing wear are replaced.
Automatic transmission rebuilt.
To ensure the greatest level of quality, we utilize the best parts and torque converters obtainable with highly trained technicians to rebuild re-manufacture your Jeep automatic transmission. We can build your automatic transmission to your specifications, including heavy duty towing transmissions with robust bands and clutch frictions, shift kits, and external cooling systems if desired. We provide a wide variety of torque converter options. All rebuilt units are supplied with stock/OE torque converters. Optional torque converters are available, including converters to satisfy your particular stall, lockup, horsepower, and torque requirements. Matching your vehicle’s desired performance (off road or rock crawling), using the correct torque converter specification is critical. Be sure to consult our Drivetrain expert at time of the order to enable you to get the converter required. You can extend the life span of your Jeep automatic transmission by installing an auxiliary transmission cooler either under the car or truck next to the transmission or behind the grill. One other good idea if you’re towing heavy loads is to monitor the transmission by installing a temperature gauge. We advise you install the sensing unit in the output side cooling line as it leave the transmission headed to the radiator cooling reservoir.
We offer the following Automatic Transmission Models for Jeep 42RE and 45RF. Don’t see what you need? Just give us a call toll free at 888-824-2012.
Experience – Quality parts equal long life Automatic Transmissions
If you’d like assistance with your automatic transmission or are having issues diagnosing the problem, give the Drivetrain expert at Midwest Transmission a call at 888-824-2012. We have the answers you need. Don’t see what you need or want us to build your core? Just give us a call. You supply the core and save the core charge.